Allied Telesis AT-SBX81XS6 Guía de instalación descargar pdf (Pagina 196)

100

101

Chapter 9: Powering On the Chassis

196 Section II: Installing the Chassis

7. With a #2 Phillips-head screwdriver, tighten the handle locking screw

to secure the power supply to the chassis. See Figure 124 on page

186.

8. Before attaching the power wires from the power supply to the circuit

breaker in the wiring closet, check that the circuit breaker is off.

9. Connect the power wires to the circuit breaker.

10. Turn the circuit breaker on.

11. Turn the On/Off switch on the power supply to the On position. See

Figure 118 on page 180.

12. Do one of the following:

 If the chassis has two AT-SBxPWRSYS1 DC Power Supplies,

repeat this procedure to power on the second power supply.

 Otherwise, go to “Monitoring the Initialization Process” on

page 197.

1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 313 314

Comentarios a estos manuales

Sin comentarios

Allied Telesis AT-SBX81XS6 Guía de instalación Pagina 196

Comentarios a estos manuales