Allied Telesis AT-SBX81XS6 Guía de instalación descargar pdf (Pagina 173)

SwitchBlade x8112 Chassis Switch and AT-SBx81CFC960 Card Installation Guide

Section II: Installing the Chassis 173

Choosing a

Method for

Attaching the

Grounding Wire

You may attach the grounding wire to the power supply using the supplied

terminal, shown in Figure 107, or bare wire.

Figure 107. Grounding Wire Terminal

The two methods are described in the following sections:

 “Connecting the Grounding Wire with the Grounding Terminal”

 “Connecting the Grounding Wire with Bare Wire” on page 176

Connecting the

Grounding Wire

with the

Grounding

Terminal

To attach a grounding wire with the grounding terminal provided with the

power supply, perform the following procedure:

1. Prepare an adequate length of stranded 10 AWG grounding wire by

stripping it as shown in Figure 108.

Figure 108. Stripping the Stranded Grounding Wire

Note

You must use stranded wire when using the grounding terminal to

connect the ground wire to the grounding post. You may not use

solid wire.

2. Insert the grounding wire into the grounding terminal provided with the

power supply and use a crimping tool to secure it to the grounding

terminal. See Figure 109,

Figure 109. Attaching the Stranded Grounding Wire to the Grounding

Terminal

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 313 314

Sin comentarios

Allied Telesis AT-SBX81XS6 Guía de instalación Pagina 173