Allied Telesis AT-SBX81XS6 Guía de instalación Pagina 150

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 314
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 149
Chapter 8: Installing the Transceivers and Cabling the Ports
150 Section II: Installing the Chassis
Installing SFP+ Transceivers in the AT-SBx81XS6 Line Card
Please review the information in “Guidelines to Installing SFP and SFP+
Transceivers” on page 145 before performing this procedure.
To install 10 Gbps SFP+ transceivers in the AT-SBx81XS6 Line Card,
perform the following procedure:
1. Remove the dust plug from the slot chosen for the SFP+ transceiver.
Figure 86 shows the dust plug removed from slot 1.
Figure 86. Removing the Dust Cover from an SFP+ Slot in the AT-
SBx81XS6 Line Card
Do not remove the dust plug from the SFP+ slot if you are not
installing the transceiver at this time. The dust plug protects the line
card from dust contamination.
2. Orient the SFP+ transceiver with the handle on top, as shown in Figure
87 on page 151.
Vista de pagina 149
1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 313 314

Comentarios a estos manuales

Sin comentarios