Allied Telesis AT-SBX81XS6 Guía de instalación Pagina 182

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 314
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 181
Chapter 9: Powering On the Chassis
182 Section II: Installing the Chassis
Figure 120. Removing the Terminal Screws
6. With a #3 Phillips-head screwdriver, connect the positive (+) power
lead wire to the positive terminal on the power supply, with one of the
terminal screws removed in the previous step. The positive terminal is
on the left. You may attach the terminals with the wires either above or
below the terminal block. Figure 121 on page 183 shows the positive
wire above the terminal block.
Allied Telesis recommends tightening the screw to 30 to 40 inch-lbs.
Vista de pagina 181
1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 313 314

Comentarios a estos manuales

Sin comentarios