Allied-telesis AT-S94 CLI (AT-8000S Series) Manual de usuario descargar pdf (Pagina 57)

Address Table Commands

Page 56

Syntax

bridge multicast forward-all {add | remove} {ethernet interface-list | port-channel port-channel-number-list}

no bridge multicast forward-all

Parameters

•

add — Force forwarding all Multicast packets.

• remove — Do not force forwarding all Multicast packets.

• interface-list — Separate nonconsecutive Ethernet ports with a comma and no spaces; a hyphen is used to

designate a range of ports.

• port-channel-number-list — Separate nonconsecutive port-channels with a comma and no spaces; a hyphen

is used to designate a range of port-channels.

Default Configuration

This setting is disabled.

Command Mode

Interface Configuration (VLAN) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example enables all Multicast packets on port 1/e8 to be forwarded.

bridge multicast forbidden forward-all

The bridge multicast forbidden forward-all Interface Configuration mode command forbids a port to be a

Forward-all-Multicast port. Use the no form of this command to return to default.

Syntax

bridge multicast forbidden forward-all {add | remove} {ethernet interface-list | port-channel port-channel-

number-list}

no bridge multicast forbidden forward-all

Parameters

•

add — Forbid forwarding all Multicast packets.

• remove — Do not forbid forwarding all Multicast packets.

• interface-list — Separates nonconsecutive Ethernet ports with a comma and no spaces; use a hyphen to

designate a range of ports.

• port-channel-number-list — Separates nonconsecutive port-channels with a comma and no spaces; use a

hyphen to designate a range of port-channels.

console(config)#

interface vlan 2

console(config-if)#

bridge multicast forward-all add

ethernet 1/e8

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 401 402

Sin comentarios

Allied-telesis AT-S94 CLI (AT-8000S Series) Manual de usuario Pagina 57