Allied-telesis AT-S94 CLI (AT-8000S Series) Manual de usuario Pagina 205

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 402
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 204
Port Channel Commands
Page 204
Command Mode
Global Configuration mode
User Guidelines
Commands under the interface range context are executed independently on each interface in the range.
Example
The following example groups port-channels 1, 2 and 6 to receive the same command.
channel-group
The channel-group Interface Configuration (Ethernet) mode command associates a port with a port-channel. Use
the no form of this command to remove a port from a port-channel.
Syntax
channel-group port-channel-number
no channel-group
Parameters
port-channel-number — Specifies the number of the valid port-channel for the current port to join.
Default Configuration
The port is not assigned to a port-channel.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example forces port 1/e1 to join port-channel 1.
show interfaces port-channel
The show interfaces port-channel Privileged EXEC mode command displays port-channel information.
Syntax
show interfaces port-channel [port-channel-number]
console(config)#
interface range port-channel
1-2,6
console(config)#
interface ethernet
1/e1
console(config-if)#
channel-group
1
mode on
01-Oct-2008 09:47:14 %LINK-W-Down: ch1
console(config-if)#
Vista de pagina 204
1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 401 402

Comentarios a estos manuales

Sin comentarios