Allied-telesis AT-S94 CLI (AT-8000S Series) Manual de usuario descargar pdf (Pagina 136)

100

101

Page 135

Allied Telesis

AT-8000S-S94-3.0 Command Line Interface User’s Guide

Chapter 11.IP Addressing Commands

ip address

The ip address Interface Configuration (Ethernet, VLAN, port-channel) mode command sets an IP address. Use

the no form of this command to remove an IP address.

Syntax

ip address ip-address {mask | prefix-length}

no ip address [ip-address]

Parameters

•

ip-address —Valid IP address

• mask — Valid network mask of the IP address.

• prefix-length — Specifies the number of bits that comprise the IP address prefix. The prefix length must be

preceded by a forward slash (/). (Range: 8 -30)

Default Configuration

No IP address is defined for interfaces.

Command Mode

Interface Configuration (VLAN) mode

User Guidelines

A single IP address can be defined. The IP address can be defined only on the Management VLAN.

Example

The following example configures VLAN 1 with IP address 131.108.1.27 and subnet mask 255.255.255.0.

ip address dhcp

The ip address dhcp Interface Configuration (Ethernet, VLAN, port-channel) mode command acquires an IP

address for an Ethernet interface from the Dynamic Host Configuration Protocol (DHCP) server. Use the no form

of this command to deconfigure an acquired IP address.

Syntax

ip address dhcp [hostname host-name]

no ip address dhcp

console(config)#

interface vlan

console(config-if)#

ip address

131.108.1.27 255.255.255.0

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 401 402

Comentarios a estos manuales

Sin comentarios

Allied-telesis AT-S94 CLI (AT-8000S Series) Manual de usuario Pagina 136

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AT-S94 CLI (AT-8000S Series)