Allied-telesis AT-S94 CLI (AT-8000S Series) Manual de usuario Pagina 353

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 402
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 352
VLAN Commands
Page 352
Default Configuration
All frame types are accepted at ingress.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures Ethernet port 1/e16 to discard untagged frames at ingress.
switchport general map macs-group vlan
The switchport general map macs-group vlan interface configuration mode command sets a mac-based
classification rule. Use the no form of this command to delete a classification.
Syntax
switchport general map macs-group group vlan vlan-id
no switchport general map macs-group group
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
MAC based VLAN rules cannot contain overlapping ranges on the same interface.
The priority between VLAN classification rules is:
MAC based VLAN (Best match between the rules)
PVID
The interface must be in General Mode to configure a MAC-based classification rule.
console(config)# interface ethernet 1/e16
console(config-if)# switchport general acceptable-frame-type tagged-only
Vista de pagina 352
1 2 ... 348 349 350 351 352 353 354 355 356 357 358 ... 401 402

Comentarios a estos manuales

Sin comentarios