Allied-telesis AT-S94 CLI (AT-8000S Series) Manual de usuario Pagina 322

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 402
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 321
Page 321
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface Users Guide
physical-port-name = Product specific.
When using the ping ipv6 command to check network connectivity of a directly attached host using its link
local address, the egress interface must be specified as defined in RFC 4007.
Example
The following example displays pinging results:
telnet
The telnet User EXEC mode command logs into a host hat supports Telnet.
Syntax
telnet {ip-address | hostname } [port ] [keyword1...] telnet
console>
ping
10.1.1.1
Pinging 10.1.1.1 with 64 bytes of data:
64 bytes from 10.1.1.1: icmp_seq=0. time=11 ms
64 bytes from 10.1.1.1: icmp_seq=1. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=2. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=3. time=7 ms
----10.1.1.1 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 7/8/11
console> ping yahoo.com.
Pinging yahoo.com 66.218.71.198 with 64 bytes of data:
64 bytes from 10.1.1.1: icmp_seq=0. time=11 ms
64 bytes from 10.1.1.1: icmp_seq=1. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=2. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=3. time=7 ms
----10.1.1.1 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 7/8/11
Vista de pagina 321
1 2 ... 317 318 319 320 321 322 323 324 325 326 327 ... 401 402

Comentarios a estos manuales

Sin comentarios