Allied-telesis AT-S94 CLI (AT-8000S Series) Manual de usuario Pagina 169

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 402
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 168
LACP Commands
Page 168
lacp port-priority
The lacp port-priority Interface Configuration (Ethernet) mode command configures physical port priority. Use
the no form of this command to return to the default configuration, use the no form of this command.
Syntax
lacp port-priority value
no lacp port-priority
Parameters
value — Specifies port priority. (Range: 1 - 65535)
Default Configuration
The default port priority is 1.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example defines the priority of Ethernet port 1/e6 as 247.
console(config)#
interface ethernet
1/e6
console(config-if)#
lacp port-priority
247
Vista de pagina 168
1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 401 402

Comentarios a estos manuales

Sin comentarios