Allied-telesis AT-S94 CLI (AT-8000S Series) Manual de usuario Pagina 266

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 402
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 265
Page 265
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface Users Guide
Parameters
This command has no arguments or keywords.
Default Configuration
Spanning tree is enabled on all ports.
Command Modes
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example disables spanning-tree on Ethernet port 1/e5.
spanning-tree cost
The spanning-tree cost Interface Configuration mode command configures the spanning tree path cost for a
port. Use the no form of this command to return to the default configuration.
Syntax
spanning-tree cost cost
no spanning-tree cost
Parameters
cost — Path cost of the port (Range: 1 - 200,000,000)
Default Configuration
Default path cost is determined by port speed and path cost method (long or short) as shown below:
Command Modes
Interface Configuration (Ethernet, port-channel) mode
console(config)# interface ethernet 1/e5
console(config-if)# spanning-tree disable
Interface Long Short
Port-channel 20,000 4
Gigabit Ethernet (1000 Mbps) 20,000 4
Fast Ethernet (100 Mbps) 200,000 19
Ethernet (10 Mbps) 2,000,000 100
Vista de pagina 265
1 2 ... 261 262 263 264 265 266 267 268 269 270 271 ... 401 402

Comentarios a estos manuales

Sin comentarios