Allied-telesis AT-S94 CLI (AT-8000S Series) Manual de usuario Pagina 352

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 402
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 351
Page 351
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface Users Guide
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the PVID for Ethernet port 1/e16, when the interface is in general mode.
switchport general ingress-filtering disable
The switchport general ingress-filtering disable Interface Configuration mode command disables the ingress
filtering of a port. Use the no form of this command to enable the ingress filtering of a port.
Syntax
switchport general ingress-filtering disable
no switchport general ingress-filtering disable
Parameters
This command has no arguments or keywords.
Default Configuration
Ingress filtering is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example disables the ingress filtering of a port.
switchport general acceptable-frame-type tagged-only
The switchport general acceptable-frame-type tagged-only Interface Configuration mode command discards
untagged frames at ingress. Use the no form of this command to return to the default configuration.
Syntax
switchport general acceptable-frame-type tagged-only
no switchport general acceptable-frame-type tagged-only
Parameters
This command has no arguments or keywords.
console(config)# interface ethernet 1/e16
console(config-if)# switchport general pvid 234
console(config)# switchport general ingress-filtering disable
Vista de pagina 351
1 2 ... 347 348 349 350 351 352 353 354 355 356 357 ... 401 402

Comentarios a estos manuales

Sin comentarios