Allied-telesis AT-S94 CLI (AT-8000S Series) Manual de usuario descargar pdf (Pagina 49)

AAA Commands

Page 48

Parameters

•

radius — Accounting is performed by a RADIUS server.

Default Configuration

Disabled.

Command Mode

Global Configuration.

User Guidelines

•

This command enables the recording of 802.1x sessions.

• If accounting is activated, the device sends a Start/Stop message to a RADIUS server when a user

logs in/logs out to the network, respectively. The software sends Start/Stop messages for each authenticated

supplicant.

• The device uses the configured priorities of the available RADIUS servers to select the RADIUS server to

use.

• If a new supplicant replaces an old supplicant (even if the port state remains authorized), the software sends

a Stop message for the old supplicant and a Start message for the new supplicant.

• The software does not send Start/Stop messages if the port is force-authorized.

• The software does not send Start/Stop messages for hosts that are sending traffic on the guest VLAN or on

the unauthenticated VLANs.

• The following table describes the supported RADIUS accounting Attribute Values when they are sent by the

switch:

Example

The following example defines the accounting of 802.1x sessions sessions to a RADIUS server.

Name Start Stop Description

User-Name (1) Yes Yes The user identity.

NAS-IP-Address (4) Yes Yes The switch IP address that is used for the session

with the RADIUS server.

NAS-Port (5) Yes Yes The switch port from where the supplicant logged in.

Class (25) Yes Yes An arbitrary value is included in all accounting

packets for a specific session.

Called-Station-ID (30) Yes Yes The switch MAC address.

Calling-Station-ID (31) Yes Yes The supplicant MAC address.

Acct-Session-ID (44) Yes Yes A unique accounting identifier.

Acct-Authentic (45) Yes Yes Indicates how the supplicant was authenticated.

Acct-Session-Time (46) No Yes Indicates how long the user was logged in.

Acct-Terminate-Cause (49) No Yes Reports why the session was terminated.

Nas-Port-Type (61) Yes Yes Indicates the supplicant physical port type.

Console(config)#

aaa accounting dot1x

radius

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 401 402

Comentarios a estos manuales

Sin comentarios

Allied-telesis AT-S94 CLI (AT-8000S Series) Manual de usuario Pagina 49

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AT-S94 CLI (AT-8000S Series)