Allied-telesis AT-S94 CLI (AT-8000S Series) Manual de usuario descargar pdf (Pagina 219)

QoS Commands

Page 218

show qos interface

The show qos interface User EXEC mode command displays interface QoS information.

Syntax

id | port-channel number] [queuing]

port-channel number]

Parameters

•

buffers — Displaying buffer setting for the interface’s queues. Displays the minimum reserved setting.

• queueing — Display the queue’s strategy (WRR or EF) and the weight for WRR queues and the CoS to

queue map and the EF priority.

• policers — Display all the policers configured for this interface, their setting and the number of policers

currently unused.

• shapers — Display the shaper of the specified interface and the shaper for the queue on the specified

interface.

• rate-limit — Display the rate-limit configuration.

• interface-number — Valid Ethernet port number.

• vlan-id — Valid VLAN ID.

• number — Valid port-channel number.

Default Configuration

There is no default configuration for this command.

Command Mode

User EXEC mode

User Guidelines

If no keyword is specified, port QoS information (e.g., DSCP trusted, CoS trusted, untrusted, etc.) is displayed.

If no interface is specified, QoS information about all interfaces is displayed.

Example

The following example displays QoS information about Ethernet port 1/e11.

console>

show qos interface ethernet

1/e11

queuing

Ethernet 1/e11

Strict Priority.

Cos-queue map:

cos qid

0 2

1 1

2 1

1 2 ... 214 215 216 217 218 219 220 221 222 223 224 ... 401 402

Sin comentarios

Allied-telesis AT-S94 CLI (AT-8000S Series) Manual de usuario Pagina 219