Allied-telesis SwitchBlade x8106 Manual de usuario descargar pdf (Pagina 202)

Chapter 9: Troubleshooting

202

Local (Out-of-Band) Management Session

If you are unable to establish a local (out-of-band) management session

with the switch through the Console RS-232 port on the active master

controller card, do the following:

 Check to be sure that the RJ-45 serial management cable is

securely connected to the Console RS-232 port on the active

master controller card and the RS-232 port on the terminal or

personal computer.

 If the chassis has two controller cards, verify that the management

cable is connected to the console port on the active master

controller card by examining the M/S LEDs on the cards. The

LEDs are solid green on the active master controller card and solid

or flashing amber on the standby master controller card.

 Check to be sure that the operating parameters on the terminal or

the terminal emulation program, if you are using a personal

computer, have been set correctly. The default settings for the RJ-

45 serial terminal port are located in “Using Local Management to

Verify the Chassis” on page 184.

 Check to be sure that the terminal emulator application is

compatible with a VT-100 terminal.

1 2 ... 197 198 199 200 201 202 203 204 205 206 207 ... 239 240

Sin comentarios

Allied-telesis SwitchBlade x8106 Manual de usuario Pagina 202