Allied-telesis SwitchBlade x8106 Manual de usuario descargar pdf (Pagina 176)

Chapter 7: Powering On the Chassis

176

7. With a #2 Phillips-head screwdriver, tighten the handle locking screw

to secure the power supply to the chassis. See Figure 121 on page

166.

8. Before attaching the power wires from the power supply to the circuit

breaker in the wiring closet, check that the circuit breaker is off.

9. Connect the power wires to the circuit breaker.

10. Turn the circuit breaker on.

11. Turn the On/Off switch on the power supply to the On position. See

Figure 115 on page 160.

12. Do one of the following:

 If the chassis has two AT-SBxPWRSYS1 DC Power Supplies,

repeat this procedure to power on the second power supply.

 Otherwise, go to “Monitoring the Initialization Process” on

page 177.

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 239 240

Sin comentarios

Allied-telesis SwitchBlade x8106 Manual de usuario Pagina 176