Allied-telesis SwitchBlade x8106 Manual de usuario Pagina 121

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 240
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 120
SwitchBlade x8106 Chassis Switch Installation Guide
121
Figure 77. Tightening the Thumb Screws on an Ethernet Line Card
8. Tighten the two screws with a # 2 Phillips-head screwdriver to secure
the line card to the chassis.
Allied Telesis recommends tightening the screws to 5 inch-lbs.
9. Repeat this procedure to install the remaining Ethernet line cards.
10. After installing the line cards. go to “Installing the Blank Slot Covers” on
page 122.
Vista de pagina 120
1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 239 240

Comentarios a estos manuales

Sin comentarios