Allied-telesis SwitchBlade x8106 Manual de usuario Pagina 123

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 240
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 122
SwitchBlade x8106 Chassis Switch Installation Guide
123
Figure 79. Tightening the Thumbscrews on a Blank Slot Cover
3. Tighten the two screws with a # 2 Phillips-head screwdriver to secure
the blank slot cover to the chassis.
Allied Telesis recommends tightening the screws to 5 inch-lbs.
4. Repeat this procedure to cover the remaining empty slots with blank
slot covers.
5. Store any unused blank panels in a secure location for future use.
6. Go to Chapter 6, “Installing the Transceivers and Cabling the Ports” on
page 125.
Vista de pagina 122
1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 239 240

Comentarios a estos manuales

Sin comentarios