Allied-telesis AT-S95 CLI Manual de usuario Pagina 86

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 348
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 85
Page 74
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
Chapter 8. DHCP Snooping Commands
ip dhcp snooping
The ip dhcp snooping Global Configuration mode command globally enables DHCP snooping. Use the no form
of this command to return to the default setting.
Syntax
ip dhcp snooping
no ip dhcp snooping
Parameters
This command has no arguments or keywords
Default Configuration
Disabled
Command Mode
Global Configuration mode
User Guidelines
For any DHCP snooping configuration to take effect, DHCP snooping must be globally enabled. DHCP snooping
is not active until snooping on a VLAN is enabled by using the ip dhcp snooping VLAN Global Configuration
mode command.
Example
.The following example configures globally enabling DHCP snooping.
ip dhcp snooping vlan
The ip dhcp snooping vlan Global Configuration mode command enables DHCP snooping on a VLAN. Use the
no form of this command to disable DHCP snooping on a VLAN
Syntax
ip dhcp snooping vlan vlan-id
no ip dhcp snooping vlan vlan-id
Parameters
vlan-id — Specify VLAN ID.
Default Configuration
Disabled
Console(config)# ip dhcp snooping
Vista de pagina 85
1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 347 348

Comentarios a estos manuales

Sin comentarios