Allied-telesis AT-S95 CLI Manual de usuario Pagina 73

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 348
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 72
Clock Commands
Page 61
Default Configuration
No servers are defined.
Command Mode
Global Configuration mode
User Guidelines
Up to 8 SNTP servers can be defined.
To enable predefined Unicast clients globally use the sntp unicast client enable Global Configuration mode
command.
To enabling global polling use the sntp unicast client poll Global Configuration mode command.
The sntp client poll timer Global Configuration mode command determines polling time.
Example
The following example configures the device to accept SNTP traffic from the server on 192.1.1.1.
show clock
The show clock User EXEC mode command displays the time and date from the system clock.
Syntax
show clock [detail]
Parameters
detailShows timezone and summertime configuration.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
The symbol that precedes the show clock display indicates the following:
Console(config)#
sntp server
192.1.1.1
Symbol Description
* Time is not authoritative.
(blank) Time is authoritative.
. Time is authoritative, but SNTP is not synchronized.
Vista de pagina 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 347 348

Comentarios a estos manuales

Sin comentarios