Allied-telesis AT-S95 CLI Manual de usuario Pagina 187

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 348
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 186
Radius Commands
Page 175
radius-server timeout
The radius-server timeout Global Configuration mode command sets the interval during which the device waits
for a server host to reply. Use the no form of this command to return to the default configuration.
Syntax
radius-server timeout timeout
no radius-server timeout
Parameters
timeout — Specifies the timeout value in seconds. (Range: 1 - 30)
Default Configuration
The timeout value is 3 seconds.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the timeout interval to 5 seconds.
radius-server deadtime
The radius-server deadtime Global Configuration mode command improves RADIUS response time when
servers are unavailable. The command is used to cause the unavailable servers to be skipped. Use the no form of
this command to return to the default configuration.
Syntax
radius-server deadtime deadtime
no radius-server deadtime
Parameters
deadtime — Length of time in minutes during which a RADIUS server is skipped over by transaction
requests. (Range: 0 - 2000)
Default Configuration
The deadtime setting is 0.
Command Mode
Global Configuration mode
Console(config)# radius-server timeout 5
Vista de pagina 186
1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 347 348

Comentarios a estos manuales

Sin comentarios