Allied-telesis AT-S95 CLI Manual de usuario descargar pdf (Pagina 341)

100

101

802.1x Commands

Page 329

Parameters

•

mac-only — Enable authentication based on the station's MAC address only. 802.1X frames are ignored.

• mac-and-802.1x — Enable 802.1X authentication and MAC address authentication on the interface.

Default Configuration

Disabled.

Command Mode

Interface configuration (Ethernet)

User Guidelines

Guest VLAN must be enabled when MAC authentication is enabled.

Static MAC addresses can't be authorized. Do not change authenticated MAC address to static address.

It is not recommended to delete authenticated MAC addresses.

Reauthentication must be enabled when working in this mode.

Example

The following example

enables authentication based on the station's MAC address.

show dot1x advanced

The show dot1x advanced privileged EXEC mode command displays 802.1X advanced features for the switch

or for the specified interface.

Syntax

show dot1x advanced

Parameters

•

interface — Ethernet interface.

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC

User Guidelines

There are no user guidelines for this command.

Example

Console# configure

Console(config)# interface ethernet 1/g1

Console(config-if)# dot1x mac-authentication

1 2 ... 336 337 338 339 340 341 342 343 344 345 346 347 348

Comentarios a estos manuales

Sin comentarios

Allied-telesis AT-S95 CLI Manual de usuario Pagina 341

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AT-S95 CLI