Allied Telesis AT-8824 Guía de instalación descargar pdf (Pagina 27)

Software Version 2.7.5 27

Software Version 2.7.5

C613-10454-00 REV A

show bootp relay port

Syntax SHow BOOTp RELAy POrt[={port-list|ALL}]

where:

■ port-list is a port number, a range of port numbers (specified as n-m), or a

comma-separated list of port numbers and/or ranges. Port numbers start

at 1 and end at m, where m is the highest numbered Ethernet switch port,

including uplink ports.

Description This command displays port-related information about the BOOTP Relay port

settings.

Use the port parameter to specify the port to display BOOTP Relay information

for. If all is specified, information about all ports on the device is displayed.

Figure 8: Example output from the show bootp relay port command

BOOTP Relay Port Information:

----------------------------------------

Port .................... 1

Trusted .................... No

Subscriber-ID .............. user12332

Port .................... 2

Trusted ....................Yes

Subscriber-ID ..............

----------------------------------------

Table 11: Parameters in output of the show bootp relay command

Parameter Meaning

Port The number of the switch port

Trusted Whether the port is trusted, either Yes or No.

Subscriber-ID The subscriber-ID assigned to the port.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 201 202

Sin comentarios

Allied Telesis AT-8824 Guía de instalación Pagina 27