Allied Telesis AT-8824 Guía de instalación Pagina 18
- Pagina / 202
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
18 New Speed and Duplex Mode Options Release Note
Software Version 2.7.5
C613-10454-00 REV A
New Speed and Duplex Mode Options
Software Version 2.7.5 extends the speed and duplex mode options for switch
ports.
Fixed Speed and Autonegotiated Duplex Mode
Software Version 2.7.5 enables you to fix the speed of copper switch ports to 10
or 100Mbps and still autonegotiate the duplex mode.
To fix the speed and autonegotiate the duplex mode, use the new 10mauto or
100mauto options in the command:
set switch port={port-list|all}
speed={autonegotiate|10mauto|10mhauto|10mhalf|10mfauto|
10mfull|100mauto|100mhauto|100mhalf|100mfauto|100mfull|
1000mhauto|1000mhalf|1000mfauto
|1000mfull}
[other-options...]
The options that apply depend on the router or switch model and the type of
port. The new options apply to all copper switch ports and SFPs that are
capable of operating at 10 or 100Mbps.
Command Changes
The following table summarises the modified command (see Command
Reference Updates)
Fixed 1000Mbps Full Duplex Mode
Software Version 2.7.5 also enables you to force ports on AT-9900 series
switches to operate at 1000Mbps in full duplex mode, instead of
autonegotiating with their link partners.
To fix the speed at 1000Mbps and the duplex mode at full duplex, use the new
1000mfull option in the command:
set switch port={port-list|all}
speed={autonegotiate|10mauto|10mhauto|10mhalf|10mfauto|
10mfull|100mauto|100mhauto|100mhalf|100mfauto|100mfull|
1000mfull|1000mfauto} [other-options...]
Command Change
set switch port New 10mauto and 100mauto options
- Software Version 2.7.5 1
- Overview of New Features 4
- MSS Clamping 5
- 8 MSS Clamping Release Note 8
- Software Version 2.7.5 9 9
- 10 MSS Clamping Release Note 10
- Syntax SHow PPP PPPoe 11
- Command changes 13
- Command Reference Updates 14
- Software Version 2.7.5 15 15
- Command Changes 18
- Syntax SHow IP 21
- DHCP Option 82 Relay 22
- Software Version 2.7.5 25 25
- Syntax SHow BOOTp RELAy 26
- IGMP Enhancements 28
- Filtering and Throttling 29
- Configuring IGMP 30
- IGMP Throttling 31
- Software Version 2.7.5 33 33
- Software Version 2.7.5 35 35
- OSPF Network Types 41
- [{FULl 45
- BGP Enhancements 46
- Automatic Summarising 48
- Aggregating Routes 50
- Software Version 2.7.5 53 53
- Syntax SHow BGP 55
- Syntax SHow BGP PEer[=ipadd] 56
- Software Version 2.7.5 59 59
- Software Version 2.7.5 61 61
- Firewall Enhancements 63
- UDP Port Timeout 65
- Software Version 2.7.5 67 67
- Software Version 2.7.5 73 73
- WAN Load Balancing 74
- VRRP Preemption Delay 75
- Software Version 2.7.5 77 77
- ..3600] [PRIOrity=1..254] 77
- Operating Principles 80
- Load Distribution Methods 81
- 1-4 Release Note 82
- WAN Load Balancing 1-5 83
- Healthcheck 84
- Assigning Weights 85
- Healthchecks 86
- Operation with Firewall 87
- 1-10 Release Note 88
- Before you 89
- Parameter Description 96
- ● eth (such as eth0, eth1) 100
- ● PPP (such as ppp0, ppp1) 100
- C613-10454-00 REV A 101
- Related Commands enable wanlb 109
- Syntax SHow WANLB 112
- Syntax SHow WANLB HEALthcheck 114
- ■ eth (such as eth0, eth1) 122
- ■ PPP (such as ppp0, ppp1) 122
- Filtering IP Routes 123
- 2-2 Release Note 124
- Introduction 125
- Types of Filters 126
- About AS Path Lists 127
- About Route Maps 127
- When to use 128
- About IP Route Filters 129
- Creating Filters 130
- Creating Route Maps for BGP 131
- How to create a route map 132
- ■ exclude the update message 133
- Example comparing 134
- AS path filter and 134
- Matching on 134
- Creating Route Maps for OSPF 138
- Creating IP Route Filters 141
- Applying Filters 142
- Applying AS path 143
- ■ prefix lists 148
- ■ AS path lists 148
- ■ route maps 148
- 2-28 Release Note 150
- [other-options] 150
- Filtering IP Routes 2-29 151
- The filtering 151
- Limitations of route 153
- Interface Routes 154
- Statically-Configured Routes 155
- Configuration Examples 156
- Using a Route Map 157
- Using an AS Path Filter 158
- Using Communities 160
- Command Reference 162
- Parameters for both 173
- Parameters for 173
- Parameters for set 176
- ■ an entire route map 181
- [PREfix=ipadd] 182
Relacionado con productos y manuales para Los conmutadores de red Allied Telesis AT-8824
(179 paginas)
(32 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.063 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales