Allied-telesis AT-SBx81CFC960 Manual de usuario Pagina 90

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 322
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 89
Chapter 5: Installing the Chassis in an Equipment Rack
90 Section II: Installing the Chassis
Required Tools and Material
Here is a list of the tools and screws for mounting the chassis in an
equipment rack:
#2 Phillips-head screwdriver
Six equipment rack screws
Flat-head screwdriver
#2 Phillips-head 10 inch-lbs torque screwdriver (optional)
Here is a list of the tools and wire for installing the grounding wire on the
chassis:
#2 Phillips-head screwdriver
Crimping tool
10 AWG stranded grounding wire
#2 Phillips-head 20 inch-lbs torque screwdriver (optional)
Warning
The chassis may be heavy and awkward to lift. Allied Telesis
recommends that you get assistance when mounting the chassis in
an equipment rack. E30
Vista de pagina 89
1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 321 322

Comentarios a estos manuales

Sin comentarios