Allied Telesis AT-iMG606BD Especificaciones descargar pdf (Pagina 338)

100

101

11. Port Management - iMAP Devices Provision New CES8-DS1 Port Form

329

AlliedView NMS Administration Guide

Port

Configuration

Device A drop-down of all the devices that have CES8 cards

configured as DS1 ports (or, if the port is an E1, all the devices

that have CES8 cards configured as E1 ports).

Ports A drop-down of the ports (card.slot) in the selected device

that are DS1 or E1, depending on the port type being

configured.

Port Profile The available profiles for the port type (DS1 or E1) appear in

the drop-down list. When the port is provisioned, it will inherit

the attributes of that profile.

Timing Reference Where the port will get its clocking reference from. The

choices are:

- SELF - Itself

- CONNECTION -

The interface to which it is connected.

Note that when this is chosen, the PSPAN automatically

has its RTP set to ON, since a PSPAN must be

using RTP

protocol to be used as a timing reference.

- CARD - The “card-level” timing reference.

PSPAN

Configuration

IP Interface The IP interface that has been configured on the card.

RTP: Whether RTP timing will be On or OFF. Refer tot he Timing

Reference field above.

UDP port The UDP port of the near end interface, the local receive ID.

Must be unique within an IP address on a card.

Peer IP Address The peer IP address of the IP interface the PSPAN is built on.

Note: If the Peer Port is configured, this field is greyed out.

Peer UDP Port Must match the peer’s UDPPORT attribute

Note: If the Peer Port is configured, this value is

automatically given to the peer port.

Peer Port

Configuration

(optional)

Device The device that contains the peer DS1/E1 port.

Port A drop-down of the ports (card.slot) in the selected device

that are DS1 or E1, depending on the port type being

configured

Note: A peer port can be on a different device or the

same device as the port, but cannot be on the same

card.

Port Profile The available profiles for the port type (DS1 or E1) appear in

the drop-down list. When the port is provisioned, it will inherit

the attributes of that profile.

Timing Reference Where the port will get its clocking reference from. The

choices are the same as for the port.

Bottom of Form Provision Enabled only after the minimum number of correct fields have

been data filled, and these fields have been data filled with valid

values.

TABLE 11-3 Provision Port for DS1/E1Form

Panel Field/Button Description

1 2 ... 333 334 335 336 337 338 339 340 341 342 343 ... 994 995

Comentarios a estos manuales

Sin comentarios

Allied Telesis AT-iMG606BD Especificaciones Pagina 338

Comentarios a estos manuales

Relacionado con productos y manuales para Gateways / Controladores Allied Telesis AT-iMG606BD