Allied Telesis AT-BMGMT Guía de instalación descargar pdf (Pagina 37)

SwitchBlade x8112 Chassis Switch Installation Guide

Table 6. Port LEDs on the AT-SBx81GP24 PoE Line Card

LED State Description

L/A

Solid Green The port has established an 1000 Mbps link to a

network device.

Flashing

Green

The port is transmitting or receiving data at 1000

Mbps.

Solid Amber The port has established a 10 or 100 Mbps link to

a network device.

Flashing

Amber

The port is transmitting or receiving data at 10 or

100 Mbps.

Off The port has not established a link with another

network device or the LEDs are turned off. To turn

on the LEDs, use the eco-friendly button.

PoE

Green The switch is detecting a powered device (PD) on

the port and is delivering power to it.

Solid Amber The switch has shutdown PoE+ on the port

because of a fault condition.

Flashing

Amber

The switch is detecting a PD on the port but is not

delivering power to it because the maximum power

budget has been reached.

PoE Off This LED state can result from the following

conditions:

 The port is not connected to a PD.

 The PD is powered off.

 The port is disabled in the management

software.

 PoE is disabled on the port.

 The LEDs on the Ethernet line cards are

turned off. To turn on the LEDs, use the

eco-friendly button.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 167 168

Sin comentarios

Allied Telesis AT-BMGMT Guía de instalación Pagina 37