Allied Telesis AT-BMGMT Guía de instalación descargar pdf (Pagina 132)

Chapter 7: Powering On the Chassis

132

Applying A/C Power to the AT-SBxPWRPOE1 Power Supplies

If you have not already installed the AT-SBxPWRPOE1 Power Supplies,

refer to “Installing the AT-SBxPWRPOE1 PoE Power Supply” on page 89

for installation instructions. To power on the power supplies, perform the

following procedure:

1. Identify AC sockets A and B in the recessed panel on the back panel

of the chassis, shown in Figure 80 on page 129. The sockets are for

the AT-SBxPWRPOE1 Power Supplies in slots A and B on the front

panel of the chassis.

2. Plug the AC power cord that comes with the power supply into one of

the plugs, as shown in Figure 83.

The plug should have a power supply in the corresponding slot in the

front panel. If the chassis has two AT-SBxPWRPOE1 Power Supplies,

you may power on either supply first.

Figure 83. Connecting the AC Power Cord for the AT-SBxPWRPOE1

Power Supply

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 167 168

Sin comentarios

Allied Telesis AT-BMGMT Guía de instalación Pagina 132