Allied Telesis AT-BMGMT Guía de instalación Pagina 103

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 168
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 102
SwitchBlade x8112 Chassis Switch Installation Guide
103
3. Align the line card with the internal chassis card guides in the selected
slot in the chassis.
Figure 62 shows an Ethernet line card aligned with slot 1.
Figure 62. Aligning an Ethernet Line Card in a Chassis Slot
4. Insert the line card into the slot, as shown in Figure 63 on page 104,
until the faceplate is firmly seated against the chassis front panel.
Caution
Forcing the line card into its chassis slot when it is not properly
aligned with the card guides may damage the backplane connector
pins inside the chassis. If there is undue resistance, remove the line
card. Check to insure that it is properly aligned with the card guides.
Vista de pagina 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 167 168

Comentarios a estos manuales

Sin comentarios