Allied Telesis AT-BMGMT Guía de instalación Pagina 105

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 168
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 104
SwitchBlade x8112 Chassis Switch Installation Guide
105
Figure 64. Tightening the Thumb Screws on an Ethernet Line Card
6. Tighten the two screws with a # 2 Phillips-head screwdriver to secure
the line card to the chassis.
Allied Telesis recommends tightening the screws to 5 inch-lbs.
7. Repeat this procedure to install the remaining Ethernet line cards.
8. After installing the line cards. go to “Installing the Blank Slot Covers” on
page 106.
Vista de pagina 104
1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 167 168

Comentarios a estos manuales

Sin comentarios