Allied Telesis AT-iMG7x6MOD series Manual de instalación Pagina 34

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 56
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 33
AT-iMG646MOD Installation Guide
34 Chapter 4: Installing the Gateway Indoors
Connecting the Fiber Optic Cable (BD and EPON)
To connect the fiber optic cable, perform the following procedure:
1. Remove the dust plug from the fiber optic port on the gateway and clean the port and connector. (See
Appendix B, “Cleaning Fiber Optic Connectors” on page 51 for information.)
2. Connect the pigtail cable to the fiber optic port on the gateway, as shown in Figure 23
.
Figure 23. Connecting the Fiber Optic Cable
Vista de pagina 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 55 56

Comentarios a estos manuales

Sin comentarios