Allied-telesis AT-S63 Manual de usuario descargar pdf (Pagina 431)

100

101

AT-S63 Management Software Command Line Interface User’s Guide

431

the network is uniquely

identified by the switch by

using the client's MAC

address. This is the default

setting.

authorised or Disables 802.1X port-based

forceauthenticate authentication and causes the

port to transition to the

authorized state without any

authentication exchange

required. The port transmits

and receives normal traffic

without 802.1X-based

authentication of the client.

The parameters are

equivalent.

unauthorised or Causes the port to remain in

forceunauthenticate the unauthorized state,

ignoring all attempts by the

client to authenticate. The

switch cannot provide

authentication services to the

client through the interface.

The parameters are

equivalent.

quietperiod Sets the number of seconds that the switch remains in

the quiet state following a failed authentication

exchange with the client. The default value is 60

seconds. The range is 0 to 65,535 seconds.

txperiod Sets the number of seconds that the switch waits for a

response to an EAP-request/identity frame from the

client before retransmitting the request. The default

value is 30 seconds. The range is 1 to 65,535 seconds.

reauthperiod Enables periodic reauthentication of the client, which

is disabled by default. The default value is 3600

seconds. The range is 1 to 65,535 seconds.

supptimeout Sets the switch-to-client retransmission time for the

EAP-request frame. The default value for this

parameter is 30 seconds. The range is 1 to 600

seconds.

servertimeout Sets the timer used by the switch to determine

1 2 ... 426 427 428 429 430 431 432 433 434 435 436 ... 463 464

Comentarios a estos manuales

Sin comentarios

Allied-telesis AT-S63 Manual de usuario Pagina 431

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AT-S63