Allied-telesis AT-S63 Manual de usuario descargar pdf (Pagina 100)

100

101

Chapter 6: Enhanced Stacking Commands

100

SET SWITCH STACKMODE

Syntax

set switch stackmode=master|slave|unavailable

Parameter

stackmode Specifies the enhanced stacking mode of the switch.

The options are:

master Specifies the switch’s stacking

mode as master. A master switch

must be assigned an IP address and

subnet mask.

slave Specifies the switch’s stacking

mode as slave. A slave does not

need an IP address. This is the

default setting for a switch.

unavailable Specifies the switch’s stacking

mode as unavailable. A switch with

this status cannot be managed from

an enhanced stack. It can be

managed locally through its RS-232

terminal port or remotely if it is

assigned an IP address and subnet

mask.

Description

This command sets a switch’s enhanced stacking status.

Note

To determine the master or slave status of a switch, use “SHOW

SWITCH” on page 62.

Note

You cannot change the stacking status of a switch through

enhanced stacking. If a switch does not have an IP address or subnet

mask, such as a slave switch, you must use a local management

session to change its stacking status. If the switch has an IP address

and subnet mask, such as a master switch, you can use either a local

or a Telnet management session to change its stacking status.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 463 464

Comentarios a estos manuales

Sin comentarios

Allied-telesis AT-S63 Manual de usuario Pagina 100

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AT-S63