Allied-telesis AT-S62 Manual de usuario descargar pdf (Pagina 258)

100

101

Chapter 19: STP Commands

258

portpriority Specifies the port’s priority. This parameter is used as a

tie breaker when two or more ports are determined to

have equal costs to the root bridge. The range is 0 to

240 in increments of 16. There are sixteen increments.

The increments are listed in Table 7. You specify the

increment of the desired value. The default is 128

(increment 8).

Description

This command configures the following STP parameter settings for a

switch port:

❑ Port cost

❑ Port priority

Example

The following command sets the port cost to 15 and the port priority to

192 (increment 12) for port 6:

set stp port=6 portcost=15 portpriority=12

This command sets the port cost to auto-detect on ports 7 to 10:

set stp port=7-10 portcost=auto

Table 7 Port Priority Value Increments

Increment

Port

Priority

Increment

Port

Priority

008128

1169144

2 3210160

3 4811176

4 6412192

5 8013208

6 9614224

7 112 15 240

1 2 ... 253 254 255 256 257 258 259 260 261 262 263 ... 419 420

Comentarios a estos manuales

Sin comentarios

Allied-telesis AT-S62 Manual de usuario Pagina 258

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AT-S62