Allied-telesis AT-S39 Manual de usuario descargar pdf (Pagina 50)

Section II: Local and Telnet Management

Setting a Switch’s Enhanced Stacking Status

The enhanced stacking status of the switch can be master switch, slave

switch, or unavailable. Each status is described below:

❑ Master switch - A master switch of a stack can be used to manage

all the other AT-8024, AT-8024GB. and AT-8026FC Fast Ethernet

Switches in a subnet. Once you have established a local or remote

management session with the Master switch, you can access and

manage all the switches in the subnet.

A master switch must have a unique IP address. You can

manually assign a master switch an IP address or activate the

BOOTP and DHCP services on the switch.

❑ Slave switch - A slave switch can be remotely managed through a

master switch. It does not need an IP address or subnet mask.

❑ Unavailable - A switch with an unavailable stacking status cannot

be remotely managed through a master switch. A switch with this

designation can be managed locally. To be managed remotely, a

switch with an unavailable stacking status must be assigned a

unique IP address.

Note

The default setting for a switch is Slave.

To adjust a switch’s enhanced stacking status, perform the following

procedure:

1. From the Main Menu, type 9 to select Enhanced Stacking.

The Enhanced Stacking window in Figure 9 is displayed.

Figure 9 Enhanced Stacking Window

Allied Telesyn AT-8024 Ethernet Switch

Enhanced Stacking

1 - Switch State-(M)aster/(S)lave/(U)navailable.... Master

2 - Stacking Services

S - Save Configuration Changes

R - Return to Previous Menu

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 241 242

Sin comentarios

Allied-telesis AT-S39 Manual de usuario Pagina 50