Allied-telesis AT-S39 Manual de usuario Pagina 111

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 242
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 110
AT-S39 Users Guide
111
Example of Creating a Tagged VLAN
The following procedure creates the Engineering VLAN in the top switch
illustrated in Tagged VLAN Example on page 103. This VLAN will be
assigned a VID of 3. It will consist of four untagged ports, Ports 9, 11, 12,
and 20, and two untagged ports, Ports 8 and 16. The VLAN traffic will not
be mirrored on another port, nor will it be sent to the switchs CPU.
To create the example Engineering VLAN, perform the following
procedure:
1. From the Main Menu, type 2 to select VLAN Menu.
2. From the VLAN Menu, type 2 to select Virtual LAN Definitions.
3. From the Virtual LAN Definitions menu, type 1 to select Create a
VLAN.
4. Type 1 to select VLAN Name and enter Engineering. Press Return.
5. Type 2 to select VLAN ID (VID) and enter 3. This is the VID value for
the new VLAN.
6. Type 3 to select Tagged Ports and enter 8,16. These are the tagged
ports of the VLAN.
7. Type 4 to select Untagged Ports and enter 9,10,11, 20. These are the
untagged ports of the VLAN.
8. Type C to select Create VLAN.
9. After the switch displays the prompt notifying you that it created the
VLAN, press any key.
10. Type S to select Save Configuration Changes.
The new Engineering VLAN has now been created.
Vista de pagina 110
1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 241 242

Comentarios a estos manuales

Sin comentarios