
Section III: Web Browser Management
232
Configuring IGMP Snooping
To configure IGMP snooping from a web browser management session,
perform the following procedure:
1. From the Home page, select Configuration.
2. From the Configuration menu, select System.
3. Select the IGMP tab.
The IGMP tab in Figure 73 is displayed.
Figure 73 IGMP Tab
4. Adjust the IGMP parameters as necessary.
The parameters are explained below:
Enable IGMP Snooping Status
Enables and disables IGMP snooping on the switch. A check in the
box indicates that IGMP is enabled.
Comentarios a estos manuales