Allied-telesis AT-MCF2300 Manual de usuario descargar pdf (Pagina 143)

Section II: Installation 143

Chapter 22

Starting a Local Management Session

To start a local management session on the optional AT-MCF2000M

Management Module:

Note

The initial management of the AT-MCF2000M Management Module

has to be from a local management session.

1. Connect the DIN-8 connector on the RS-232 Serial Management cable

included with the AT-MCF2000M Management Module to the RS-232

Terminal port on the management module.

Figure 82. Connecting the RS-232 Serial Management Cable to the RS-

232 Terminal Port

2. Connect the DB-9 connector on the management cable to an RS-232

port on a terminal or a PC with a terminal emulator program.

3. Configure the terminal or terminal emulator program as follows:

❒ Baud rate: 115200 bps (The baud rate of the RS-232 Terminal port

is adjustable from 9600 to 115200 bps. The default is 115200 bps.

To adjust the baud rate, refer to the AT-S85 and AT-S97

Management Software Command Line User’s Guide.)

❒ Data bits: 8

❒ Parity: None

1203a

AT-MCF2000M

STAC

10/100/1000BASE-T

DY BUSY

POWE

BOOT

FAULT

0 L

T 10/10

ACT

LIN

PORT A

CTIV

ITY

AT-MCF2KFAN

NORMAL

FAU

STATU S

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 189 190

Sin comentarios

Allied-telesis AT-MCF2300 Manual de usuario Pagina 143