Allied-telesis AT-MCF2300 Manual de usuario descargar pdf (Pagina 109)

AT-MCF2000 Media Converter Series Installation Guide

Section II: Installation 109

4. Align the edges of the module with the guides in the slot and carefully

slide the module into the chassis until it is flush with the front of the

chassis. Light pressure may be needed to seat the module on the

connector on the backplane in the chassis.

Caution

Do not force the module into place. If there is resistance, remove the

module, verify that the edges of the card are properly aligned in the

guides in the chassis’ module slot, and reinsert it.

Figure 52. Installing a Media Converter Module

5. Tighten the two captive screws on the media converter module with a

cross-head screwdriver to secure the module to the chassis.

Figure 53. Securing a Media Converter Module

6. Repeat this procedure to install additional media converter modules.

1121-a

AT-MCF2012LC

-M

1122-a

AT-MCF2012LC

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 189 190

Sin comentarios

Allied-telesis AT-MCF2300 Manual de usuario Pagina 109