Allied-telesis AT-MCF2300 Manual de usuario descargar pdf (Pagina 116)

Chapter 14: Installing the AT-MCF2000S Stacking Module

116 Section II: Installation

2. Unpack the AT-MCF2000S Stacking module from its shipping

container and verify the package contents listed in Table 28.

Note

You should retain the packaging material in the event you need to

return the unit to Allied Telesis.

3. Assign the module a unique chassis ID number by setting the SW2

DIP switches. (For background information, refer to “Chassis ID

Numbers” on page 79 or the AT-S85 and AT-S97 Management

Software Command Line User’s Guide.) The ID number is set with

switches 1 to 5. Switch 6 is not used. If there is tape on the DIP

switches, remove the tape. To set the switches, use a pointed object,

such as the tip of a ball point pen. The settings are listed in Table 35

on page 179 and Table 36 on page 180, and in the table printed on the

module. For example, to assign the module the chassis ID number 4,

set DIP switches 1,2, 4, and 5 to on and switch 3 to off.

Table 28. AT-MCF2000S Module Items

Component Description

One AT-MCF2000S

Module

One Installation and User

Documentation CD or the

AT-MCF2000S Installation

Guide

T-MCF2000

POR

ACT

IVITY

ASSIS

1264

1405

Stacking

Module

AT-MCF2000S



Installation

Guide

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 189 190

Sin comentarios

Allied-telesis AT-MCF2300 Manual de usuario Pagina 116