Allied-telesis AT-S97 Manual de usuario descargar pdf (Pagina 97)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide

An example of the information is shown in Figure 11.

Figure 11. SYSTEM SHOW CHASSIS Command

The columns are defined here:

 Chassis ID - The identification number of the chassis. For information,

refer to “Setting Chassis ID Numbers” on page 18.

 Chassis Name - The name of the chassis, set with the SYSTEM SET

CHASSIS command. For information, refer to “SYSTEM SET

CHASSIS” on page 59.

 Chassis Type - The chassis’ model name.

 MAC Address - The chassis’ MAC address.

 Master Chassis - Whether the chassis is the master chassis of a stack.

To be the master chassis of a stack, the status of the chassis’

management module must be set to active. Possible status are:

– Yes: The status of the management module in the

chassis is active, making it the master chassis of the

stack.

– No: The chassis has a stacking module.

 Slot ID: A slot in the chassis. Possible values are:

– M: The management slot, used for the AT-MCF2000M

Management Module and the AT-MCF2000S Stacking

Module.

– number: A media converter slot number (for example,

1, 2, etc.). An empty slot is not included in the table.

 Module Name: The name of the module, set with the“SYSTEM SET

MODULE” on page 86.

 Module Type - The module’s model name.

 Software Version - The version number of the module’s AT-S85 or

AT-S97 Management Software.

Chassis Chassis Chassis MAC Master

ID Name Type Address Chassis

------------------------------------------------------------------

0 AT-MCF2000 11:22:33:44:55:55 Yes

Slot ID Module Name Module Type Cfg Overwrite Software Version

---------------------------------------------------------------------

M AT-MCF2000M v2.0.0

1 AT-MCF2012LC Disable v2.0.0

2 AT-MCF2012LC Disable v2.0.0

A AT-MCF2KFAN - -

B AT-MCF2000AC - -

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 253 254

Sin comentarios

Allied-telesis AT-S97 Manual de usuario Pagina 97