Allied-telesis AT-S97 Manual de usuario descargar pdf (Pagina 19)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide

The ID number for a chassis is set with a jumper on the management

module, shown in Figure 1 on page 18. The chassis ID number for a

management module is either 0 or 31. The default setting is 0.

Within a stack, you assign the management module on the master unit

with a chassis ID of 0. You assign all of the AT-MCF2000S Stacking

modules on the slave chassis with a chassis ID of 1 through 30. For more

information about stacking, see Chapter 2, “Stacking” on page 35.

To view the ID number of a chassis, issue this command:

system show cluster

For further information, see “Displaying the Chassis Modules” on page 28

or “SYSTEM SHOW CLUSTER” on page 99.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 253 254

Sin comentarios

Allied-telesis AT-S97 Manual de usuario Pagina 19