Allied-telesis AT-S97 Manual de usuario descargar pdf (Pagina 108)

Chapter 6: Port and Module Commands

108

SYSTEM SHOW MODULE

Syntax

system show module id=

chassis

slot

Parameters

id Identifies a module. You can specify only one module at a

time. The ID number consists of the following parts:

chassis Identifies the ID number of the chassis. The

chassis ID number depends on which module is

installed in the management slot of the chassis.

When a management module is installed in this

slot, the chassis ID number is 0 or 31. When a

stacking module is installed in this slot, the

chassis ID can be from 1 to 30.

slot Specifies the ID number or letter of the slot with

the module. Possible values are:

m Specifies the management module

slot. This slot is used for the

management module or the stacking

module.

a or b Specifies a slot letter of a power

supply or fan module. In the

AT-MCF2000 Chassis, the left slot is

A and the right slot is B when the unit

is viewed from the back.

1 or 2 Specifies a slot number of a media

converter module. In the

AT-MCF2000 Chassis, the left slot is

1 and the right slot is 2 when the unit

is viewed from the front.

To view the ID and slot numbers of a chassis, refer to

“SYSTEM SHOW CLUSTER” on page 99 or “SYSTEM

SHOW CHASSIS” on page 96.

Privilege Levels

Administrator, read-write, and read-only.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 253 254

Sin comentarios

Allied-telesis AT-S97 Manual de usuario Pagina 108