Allied-telesis AT-S62 Manual de usuario descargar pdf (Pagina 788)

100

101

Chapter 49: 802.1x Port-based Access Control

Section VIII: Web Browser Management 788

Setting Port Roles

To set port roles for port-based access control, perform the following

procedure:

1. From the Home Page, select Configuration.

The System page is displayed with the General tab selected by

default, as shown in Figure 194 on page 586.

2. Select Security.

The Security page is displayed with the 802.1x Port Access tab

selected by default, as shown in Figure 283 on page 786.

The graphical image of the switch shows which ports have been

assigned port roles. An “A” indicates that a port is functioning as

an authenticator while an “S” indicates the port is functioning as a

supplicant. A black port has not been assigned a port role and is

not participating in port-based access control. This is the default

setting for a port.

3. To set a port’s role, click on the port. The selected port turns white.

You can select more than one port at a time.

4. Click Port Role.

The Port Role Configuration page is shown in Figure 284.

Figure 284 Port Role Configuration Page

5. Select the desired role for the port. Click None if the port is not to

participate in port access control. This is the default setting. Clicking

Authenticator configures the port to function as an authenticator.

This is the appropriate setting if the port is connected to a supplicant.

Clicking Supplicant sets the port to function as an supplicant. This is

the appropriate setting if the port is connected to an authenticator. A

port can have only one port role at a time.

6. Click Apply.

1 2 ... 783 784 785 786 787 788 789 790 791 792 793 ... 861 862

Comentarios a estos manuales

Sin comentarios

Allied-telesis AT-S62 Manual de usuario Pagina 788

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AT-S62