Allied-telesis AT-S62 Manual de usuario descargar pdf (Pagina 645)

100

101

AT-S62 User’s Guide

Section VIII: Web Browser Management 645

Downloading a File

This procedure explains how to download a file from a TFTP server on

your network to the switch using the web browser interface. You can

download any of the following files:

❑ AT-S62 image file

❑ Boot configuration file

❑ Public key

❑ CA certificate

Note

The public key and CA certificate are only supported on the version

of AT-S62 management software that features SSL, PKI, and SSH

security.

Caution

Installing a new AT-S62 image file will invoke a switch reset. Some

network traffic may be lost.

Note the following before you begin this procedure:

❑ You must use TFTP to download a file from a web browser

management session.

❑ There must be a node on your network that contains the TFTP

server software.

❑ The file that you are downloading must be stored on the TFTP

server node.

❑ You should start the TFTP server before you begin the download

procedure.

❑ The AT-S62 image file contains the bootloader for the switch. You

cannot load the image file and bootloader separately.

❑ Installing a new AT-S62 software image does not change the

current configuration of a switch (for instance, IP address, subnet

mask, and virtual LANs). If you want to return a switch to its default

configuration values, refer to Returning the AT-S62 Software to

the Factory Default Values on page 76.

❑ The switch on which you are downloading the file must have an IP

address and subnet mask, such as a master switch of an enhanced

stack. You cannot use TFTP on a slave switch, since that type of

1 2 ... 640 641 642 643 644 645 646 647 648 649 650 ... 861 862

Comentarios a estos manuales

Sin comentarios

Allied-telesis AT-S62 Manual de usuario Pagina 645

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AT-S62