Allied-telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT Manual de usuario descargar pdf (Pagina 51)

AlliedView™-EMS 3.11 Device Management Guide Page 51 of 402

Note - The current firmware version returns a "noSuchName" value for the

following parameters:

o Alignment Error Frames

o Multi Collision Frames

o SQE Test Errors

o Deferred Transmissions

o Excessive Collisions

o Internal MAC Transmit Errors

o Carrier Sense Errors

o Symbol Errors

Additional Info

Displays information about a table containing 64-bit versions of error counters.

Note - The current firmware version is unable to display any value for the Port

Number and Alignment Error Frames (HC) parameters.

Note - The current firmware version returns a ‘noSuchName’ value for the Internal

MAC Transmit Errors (HC) and Internal MAC Received Errors (HC) parameters.

Detail Info

Displays detailed port information such as duplex mode.

Note - The current firmware version does not allow the following parameters to be

configured:

• Tagged Mode

• Default Priority

• Row Status

• Port Flow Control Config

• Port Speed

• Reactivate

• Combo Ethernet Config

Note - Device Manager does not handle 8-bit string parameters correctly. As a result,

the Autonegotiation Capabilities Config parameter will display an unrecognizable

value and will not be configurable. The Autonegotiation Capabilities Status and

Remote Autonegotiation Capabilities parameters will also display unrecognizable

values.

Note - The Physical Address Type parameter is not applicable to the AT-8000S

series and should be ignored.

Note - The combo ports will not display the Port Context Menu on right-mouse

click if logged-on in SNMPv3 mode using a user account with no read-write access

to the Transceiver Type parameter.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 401 402

Sin comentarios

Allied-telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT Manual de usuario Pagina 51