Allied-telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT Manual de usuario descargar pdf (Pagina 42)

100

101

AlliedView™-EMS 3.11 Device Management Guide Page 42 of 402

Note - The Backup Address parameter is not applicable to the AT-8000S

module and should be ignored.

Static Route Table

Displays the IP static routing table.

Note - The current firmware version does not allow the Routing Type parameter to

be set to ‘local’ for all models except the AT-8000S/16. For the AT-8000S/16, the

Routing Type parameter cannot be set to ‘remote.’

IP Statistics

Displays statistics about IP routing, including the number of IP datagrams received.

Note - The current firmware version does not allow the Forwarding Status

parameter to be configured.

ARP Table Config

Displays configuration information about ARP.

I/F Name-Address Translation

Displays information about the IP interface's name translated to an IP interface

address.

TFTP

Displays configuration information about the TFTP.

Note - The current firmware version does not allow the Get Config File parameter

to be configured to receive image/config/boot files from a TFTP server.

Note - The current firmware version does not allow the Send Config File parameter

to be configured to send config/image/boot files to a TFTP server.

UDP

Listener Info

Displays UDP listener information.

UDP Statistics

Displays UDP statistics.

TCP

Connection Info

Displays TCP connection-specific information.

Note - The current firmware version does not allow the Connection Status

parameter to be configured.

TCP Statistics

Displays TCP statistics.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 401 402

Comentarios a estos manuales

Sin comentarios

Allied-telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT Manual de usuario Pagina 42

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT