Allied-telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT Manual de usuario Pagina 332

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 402
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 331
AlliedView™-EMS 3.11 Device Management Guide Page 332 of 402
Note - The current firmware version does not allow Device Manager to configure or
display information on the T1/E1 port of the AT-CM70S.
Context Menu
Note - Selecting the Telnet option in the RS-232 Terminal Port Context Menu of the
AT-CM70S will establish a Telnet session to the AT-CV5M01 management module.
AT-CV10x
AT-CV101: 100TX to 100FX (ST)
AT-CV102: 100TX to 100FX (SC)
LED State Description
LT Green Link Test is enabled
SML Green Smart Missing Link is enabled
ML Green Missing Link is enabled
LCDS Green Line Card Dip Switch is enabled
Module Info
Note -The current firmware version does not return the correct value for the
Module MAC Address parameter.
Note - Configuring the Module Operation Mode parameter will result in the error
message: "The error occurred with 'Set' operation. Error: time out occurred".
Port Info
Note - The current firmware version does not allow any of the parameters under
this table to be configured.
AT-CV1KSS
1000X to 1000X SFP
Vista de pagina 331
1 2 ... 327 328 329 330 331 332 333 334 335 336 337 ... 401 402

Comentarios a estos manuales

Sin comentarios