Allied-telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT Manual de usuario descargar pdf (Pagina 123)

AlliedView™-EMS 3.11 Device Management Guide Page 123 of 402

Note - The port speed displayed on the Ethernet port images is always '100' even if the

Ethernet port is connected to a 10Mbps port on another device.

Note - The four Ethernet ports on the AT-AR250E and AT-AR255E operate as a single port.

As a result, even if connection is established on just one port, all four ports will turn green.

Note - Expect the ADSL port to be green even if there is no physical connection established.

Note - The current firmware version does not allow you to disable the Ethernet ports.

Note - The current firmware version does not allow you to manually configure the speed of

the Ethernet ports.

Agent Menu

From the Agent menu, you can view and edit the system information for the router, or log

into the CLI using Telnet.

System Info

Displays basic system information, including system name, location, contact and

description.

Note - The current firmware version returns 'enterprises' instead of the actual OID

of the device for the System Unique Object ID parameter.

Note - Clicking on the 'Set MIB Value' button several times when configuring System

Info parameters will result in the error message: "The error occurred with 'Set'

operation. Error: time out occurred."

Note - The current firmware version does not allow System Info parameters to be

configured at the same time. Attempting to do so will result in the error message:

"The error occurred with 'Set' operation. Error: time out occurred."

Telnet

Starts a Telnet connection to the router.

WEB Browser

Connects to the router's HTTP server.

Routing Menu

From the Routing menu, you can view and edit information about the router's IP routing

functions.

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 401 402

Sin comentarios

Allied-telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT Manual de usuario Pagina 123