Allied-telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT Manual de usuario descargar pdf (Pagina 127)

100

101

AlliedView™-EMS 3.11 Device Management Guide Page 127 of 402

Interface Configuration

Displays ATM interface configuration information.

Note - The current firmware version does not allow the following parameters to be

configured:

• Max VPC

• Max VCC

• Max Active VPI Bits

• Max Active VCI Bits

• ILMI VPI

• ILMI VCI

• Neighbor IP Address

• Neighbor Name

Attempting to configure these parameters will result in the error message: "The

error occurred with 'Set' operation. Error: gen Error."

Interface DS3 PLCP

Displays DS3 PLCP configuration and state parameters.

Note - The Interface DS3 PLCP sub-menu option does not display the correct

parameters. Instead, it displays the sub-menu option name as a parameter with a

value of 'noSuchName'.

Interface TC Sublayer

Displays TC Sublayer configuration and state parameters.

Note - The Interface TC Sublayer sub-menu option does not display the correct

parameters. Instead, it displays the sub-menu option name as a parameter with a

value of 'noSuchName'.

Traffic Descriptor

Diplays information on the ATM traffic descriptor type and its associated

parameters.

Note - The current firmware version does not allow the following parameters to be

configured:

• Type

• Parameter 1

• Parameter 2

• Parameter 3

• Parameter 4

• Parameter 5

• QoS Class

• Status

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 401 402

Comentarios a estos manuales

Sin comentarios

Allied-telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT Manual de usuario Pagina 127

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT